German
Dummyloads
and Filter units for amateur radios
If
QRM/QRN to strong or your radio create harmonics ......
HF-Measurements
Zeitmessanlage DerbyControl
LED-Groß-Displays
Ampelsystem
Antenna systems
Antenna installing Services
Dummyload-systems
Amateur filter systems
Referenzen
Download
Archiv
Contact
Impressum
Home
The filter units are developed directly für amateur radio systems and base on LC circuits high order. We use only high quality units and built with Mica capacitors, COG SMD units and original Amidon iron powder cores. The result are very good datas of the filters and low loss over transmission ways.
Available filter systems from us:
Behind the headlines are the links with descriptions, manuals and measurement results.
1. 9-band, 300W Low-Pass filter for short wave-PA's (for more info click here)
6 switchable filter ways, loaded up to 200W CW or 300W SSB PEP,
10A relays contacts, solid construction
This filter provide 30dB suppression of harmonics at 1. and follow harmonic frequencies and have only
0,3 - 0,6dB transmission loss.
dimensions (lengh x wide x high): 160 x 100 x 37mm
price for Lowpass-filter 300W: 189,50 € + shipping
2. 9-band, 1,3kW Low-Pass filter for short wave-PA's (for more info click here)
6 switchable filter ways, loaded up to 1000W CW or 1,3kW SSB PEP,
10A relays contacts, solid construction
This filter provide 30dB suppression of harmonics at 1. and follow harmonic frequencies and have only
0,3 - 0,6dB transmission loss.
dimensions (lengh x wide x high): 160 x 100 x ca. 100mm
price for Lowpass-filter 1,3kW: 289 € + shipping
3. high-signal 9-band-Preselector (for more info click here)
at moment not available
9 switchable band pass filter was with 30dB selection, 18 dB pre-amplifier with OIP3 =34dBm(!), 16dB
Attenuator, can controlled by remote, bypass function, TX / RX switching with PTT or VOX for up to
300 watts CW with 10A relais, 1206 COG capacitors and Amidon iron powder cores, over voltage protection
This filter block outband signals with 30dB (5 S-steps) and make it easier for the TRX mixers to do a good job.
dimensions (lengh x wide x high): 160 x 100 x ca. 40mm
optional available: Controller with LCD Display, button panel and CAT interface
Price preselector with pre-Amp., attenuator, without controller: 178 € + shipping
Price for complete preselector system with case and CAT-controller: 315 € + shipping
4. Controller with LCD display for preselector (for more info click here)
at moment not available
Controller for short wave preselector with LCD display, 6 button panel for dand UP/Down, Set,
Bypass,TX / RX switching, Pre-Amp and attenuator, remote interface via I/O or COM port with
CAT comands, show status of remote controlled functions on display, real COM RS232 (no COM converter requiered).
price for controller with LCD display and button pcb: 84 € + shipping
front view SW-Preselector with case
Backside SW-Preselector
at moment not available
9 switchable band pass filter was with 30dB selection, 18 dB pre-amplifier with OIP3 =34dBm(!), 16dB
Attenuator, can controlled by remote, bypass function, TX / RX switching with PTT or VOX for up to
300 watts CW with 10A relais, 1206 COG capacitors and Amidon iron powder cores, over voltage protection
This filter block outband signals with 30dB (5 S-steps) and make it easier for the TRX mixers to do a good job. All connection sockets at backside, 2x PL UHF sockets, 1x 2,1mm hole pin connector (+12 volts power), 1x 15 pin sub-D socket (remote interface + CAT).
Dimmensions (W x L x H): ca. 103 x 168 x 60mm
This system is shipped as complete unit with aluminium case and CAT controller inside. The SW preselector as final unit are not on stock and built on request. This process require 2-3 week delivery time. Please contact us when you want this system.
Price for complete preselector system with case and CAT-controller: 315 € + shipping